Bullet Points:
1、High-quality Material: The tire snow chain is made of high-quality quenched manganese steel chain, which is strong and durable, will not damage the tire, reduce noise, wear resistance, cold and aging, tightly fit and not damage the tire to ensure durability and service life.
2、Multi-Function: Skid-protective chains can effectively remove snow, enhance the Skid-protective effect, and prevent skidding in an all-round way. Enlarge the friction surface between the tire and the ground, with the minimum braking distance and maximum traction, providing a perfect Skid-protective effect in bad weather, thereby improving the safety performance during travel.
3、Easy to Install and Disassemble: The car safety chain is easy to install, no jacks, no need to remove the tires, safe to use, the chain has a simple tension adjustment belt, which can easily rescue your vehicle from difficult environments, and no need to pay higher towing fees.
4、Powerful Protection: Strong engineering straps, compact and wear-resistance, strong tensile strength; wear protective and soft pad to prevent the tensioner from contacting the tire, effectively preventing the tire hub from wearing when the tire chain is running, and not hurting the brake line. Double-channel balance chain, balanced design, auxiliary main chain, even if the chain is broken, it will not damage the car.
5、Emergency Road Rescue: Easy to carry and store, maintain good performance around the clock, it is an essential tool for travel, snow, mud, climbing, ice and other emergency situations, suitable for most SUV, MPV, and cars. Note: steel wheels with heat dissipation holes are unavailable, and the gap between the wheel holes is too small and unusable. It is forbidden to install snow chains at the tire inflation holes.
Description:
Instructions:
1. Use a tool to hook out the webbing from the seam of the hub.
2. Thread the webbing through the shaft hole.
3. Grab the handle up and down to recycle the tight webbing.
4. Automatic tightening device, tighten to suitable strength.
Specification:
Material: hardened manganese steel, nylon engineering belt
Applicable size:
Small size applicable tire width: between about 165-215mm/6.5-8.46in
Large applicable tire width: between about 225-285mm/8.86-11.22in
Installation: jack-free, quick installation
Applicable scenarios: ice, snow, muddy road, desert, loess, climbing, speed limit below 40KM/H
Low temperature tolerance: -40℃
Note: It is recommended to use 4-5 pieces for one tire
Packing List:
1* Snow Chain
Note:
Please allow slight tolerances in size due to manual measurement, and lighting in photography may result in difference in color than it is in real life.
